International Flat Figure Society - British Flat Figure Society

Feedback Forum - Comments => Report a Problem => Topic started by: Nicholas Ball on August 19, 2013, 09:53:11 AM

Title: posting in workbench
Post by: Nicholas Ball on August 19, 2013, 09:53:11 AM
Hi Mark, just to let you know, that I have just tried twice to post a new set of figures with 6 photos, but after a couple of minutes it just cleared itself and NO post. 

Title: Re: posting in workbench
Post by: marko on August 19, 2013, 10:15:30 AM
It looks like it did post your figures into Workbench - Tweedledum and Dee are great figures.


I will continue to watch this - so far it seems to be behaving now that we are on a new server but, not out of the woods yet.


Please continue to report if and when you have issues and the time frame.  I will keep on our ISP about this.


Mark
Title: Re: posting in workbench
Post by: Nicholas Ball on August 19, 2013, 03:34:47 PM
I posted T&T just before I tried the set of 6 from The Tauroggen convention.

Even T&T took time to post ( over 5 minutes)  but as I said the second lot just shut down after about 10 minutes of trying.

I will try to post these tomorrow again. ;)
Title: Re: posting in workbench
Post by: marko on August 19, 2013, 04:06:12 PM
ok let me know.  Isp has moved both the site ansd staging site onto new hardware.  I am no longer seeing messages about the site being unavailable from our test software which tests it every 15 minutes.  for a while it was down 30 minutes out of every 60.


From what i am seeing it is back to stable and quite fast so your issues are puzzling.


mark
Title: Re: posting in workbench
Post by: Nicholas Ball on August 20, 2013, 04:16:33 AM
no still not posting, maybe it's because I'm trying to do 6 photo's.

will try later with 4 and 3
Title: Re: posting in workbench
Post by: Brian on August 20, 2013, 04:37:21 AM
Just tried two lots and both loaded fine, 6 photos in each test and all OK this end  ???   
Title: Re: posting in workbench
Post by: Nicholas Ball on August 20, 2013, 07:19:09 AM
What you trying to say Brian,  don't be shy, come straight out with it, I'm a man I can take it !!! ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D
Title: Re: posting in workbench
Post by: marko on August 20, 2013, 11:00:13 AM
It sounds very much like an issue with the size of the photos.  PHP the language our system is in can only handle 7 mb of data at one time.  This limits the ability to upload photos in bunches and unfortunately does not warn you, it just will not work.


Anyway system seems to be stable and working well now.  Again sorry for the inconvienence.


mark  8)