International Flat Figure Society - British Flat Figure Society
Flat Figures Painters Forum => Newbie Section => Topic started by: Midge on June 11, 2017, 07:37:02 AM
-
Hi
I am a total newbie to flats so could you guys advise me on what medium & method I would need to use to to age or antique flats rather than painting them in the traditional way. I hope to use this method on a couple of pieces to give as gifts.
Thank You for any advice.
Cheers
Midge
-
Are you looking at darkening or rusting them? Possibly a dark oil paint wash filling in the cracks and crevices followed by a lighter drybrushing working from the top and going downward? Perhaps an illustration/image of what you're looking for would be helpful?
Glen
Edit: I probably should have read Midge's first post. In my defense, I've only had one cup of coffee (so far) this morning... ::)
-
One very old and simple approach is to undercoat in a dark color and then use rub'n buff which is a paste that can be applied with a cloth. There is a silver, silver and bronze product all of which provide a nice aged look.
mark 8)
-
Thanks Guys I appreciate your input!
What I would actually like to do is just bring out the detail. Would putting on a dark wash and then rubbing it off be a solution?
Midge
-
Clean the figure of flash, black oil paint dabbed on and in one direction gently clean the paint off, this give you a patina on the figure ;)
[attachimg=1]
-
Give it a dark or black (very liquid) oil paint,
let it dry
and go over it with steel-wool pad (for cleaning pans and working tables)
to bring out the bare metal as highlights.
-
Thanks for all the advice guys its much appreciated, I have plenty of acrylics, but no oils so I'll go and buy a small tube of black oil paint.